A Compact Checklist to Follow after Your Bike Servicing

Posted on: May 6, 2022 | | Written by:

A Compact Checklist to Follow after Your Bike Servicing

Several factors are responsible before you plan and execute the idea of buying a two-wheeler. You first assess the level of your requirement, arrange for the necessary funds, and then proceed to finally purchase a brand-new two-wheeler. Bike maintenance ensures you a safe and sound, secure ride. You have to ensure that your bike remains in its peak condition. You must not show carelessness or ignorance even for the smallest detail and ensure that no part of it remains damaged or below standard. It may prove to be harmful not only for the bike but for the rider too, along with the maintenance of two-wheeler insurance.

Every make of two-wheelers possesses a definite service cycle. You must ensure to follow the routine and seek expert and professional servicing, done at the correct time, without breaking the schedule at authorised service stations. But have you ever wondered what happens to your bike after the completion of the due servicing? If you are observant enough, you will understand whether the service done is up to the mark or not.

Here’s a compact checklist that you can easily follow to ensure proper servicing of your two-wheeler

1. Air pressure:

When your bike servicing is complete, you must scrutinize the tyres to check if the ideal level of air pressure is maintained or not. You can easily judge the inflation of the tyres, unless they turn visibly flat, due to any leakage. It is best that you carry a tyre pressure meter gauge with you and get it checked regularly at the garage. This will ensure the maintenance of the ideal tyre pressure, depending on your driving habits, and seasons. Make it a habit of regularly checking your two-wheeler at different pressures as you ride it.

2. Engine oil:

After the servicing is complete, you must ensure that the ideal level of engine oil is maintained. This acts as the chief lubricant and allows the engine to run smoothly, ensuring proper functioning. With regular usage, the engine oil gradually turns thick with carbon deposits. Under such circumstances, it is best to wash it out to be replaced with fresh lubricant at the optimum level to ensure the best performance. Always seek if there is any leakage anywhere, as that will automatically reduce the oil and fluid levels, causing unnecessary drainage. If you run your bike without an oil change, it will gradually hamper the performance of the engine, especially in the long run.

3. Brakes:

Being one of the most crucial factors of driving and riding any vehicle, you must carefully monitor the brakes at all times, without fail. If you regularly use your bike, especially on rough roads and terrains, the brakes are bound to get damaged. Always ensure to keep both the brakes, holding ideally spaced and aligned tyres. It is very dangerous if the brakes turn either too tight or too loose. If it gets extremely tight, it becomes hard to use during the right time. When it turns to lose, it refuses to tighten the grip over your two-wheeler, causing it to stop. In either case, it is highly dangerous with a potential risk of fatality.

Notice the amount of meat left on the pads and ensure that they are wearing evenly. Continuing with a worn off brake pad will eventually damage the rotors, making it dangerous. Check the brake oil levels and the brake lines too. It is best to get it adjusted in a customised manner, depending on the driving style of the concerned rider. If you feel any difficulty, get it checked immediately at the earliest, without any further delay. Expert guidance and professional help will serve you best under such circumstances. After service, you will have to ensure that the strength of the brakes is ideal for your usage.

You may at times hear an irritating screeching noise while driving your beloved two-wheeler. This might develop because of any issue in the front brake pads. Any dissatisfaction with the brakes must be replaced immediately to avoid any unfortunate accidental circumstances. Improperly lubricated brake pads might also be the reason for such screeching sounds. If that is the case, then proper lubrication will easily resolve the issue. But, it is best to get it diagnosed by expert technicians, without any delay to ensure safety.

4. Spark plug:

After your bike has undergone servicing, you must ensure that the installed spark plug is clean or not. In case of any damage or breakage, make sure that you get it replaced straight away. It should be ideally placed, maintaining proper gaping, unless you will get faulty performance from your bike. The spark plug remains connected with the engine combustion and hence the screeching noise.

Is vital that it undergoes regular maintenance. You must keep an eye on close monitoring of the bike carburetor, chain set, air filters, etc.

Conclusion

Now, it is clear to you what are the major aspects of your bike that needs close monitoring and regular maintenance. You have got a clear idea about how to keep your endearing two-wheeler safe and secured to avoid any unprecedented unfortunate circumstances. Apart from these technical aspects, you must unfailingly keep it under the safe coverage of proper two-wheeler insurance.

Disclaimer: The above information is for illustrative purpose only. For more details, please refer to policy wordings and prospectus before concluding the sales.

Bike Servicing Tips You Must Follow!

Bike Maintenance Hacks Every Owner Should Know

• Effective Tips for Keeping your Bike in Top Condition Always