1. Home
2. Blogs

Six Methods to Make Your Motorcycle Exhaust Quieter

• 
• 
• 
• 0
• 0

Published on March 2, 2022. EST READ TIME: 3 minutes

Bike riders have long desired the freedom and satisfaction of accompanying their two-wheeled buddy on wonderful trips. To do this, your bike must be properly maintained, which includes regular service, oil changes, and buying online bike insurance. And, while your two-wheeler is a monster, they typically begin to create sounds as they age and the engine & exhaust performance deteriorates owing to a variety of circumstances.

We've compiled a list of 6 tried-and-true techniques for quieting your exhauster

1. Muffler Replacement

This is a tried and true method for soundproofing your motorbike exhaust system and reducing the unpleasant noise it emits. Mufflers are made out of perforated tubes that deflect sound waves created by your bike's engine, so dampening the noise that exits your two-wheeler.

If you purchased a used bike, it is likely that the prior owner made changes to it, such as the muffler removal. Replace the mufflers and pipes to see if it helps reduce noise. Mufflers are widely accessible and reasonably priced, so purchasing one will be simple. Online bike insurance covers the cost of a muffler replacement.

2. Patch any holes in your bike's exhaust pipe

The existence of holes in your motorbike exhaust system is one of the leading causes of noise.

As a result, begin by examining your exhausts for any leaks and sealing them to see if this reduces noise. How can you stop the leaks?

This is generally determined by the magnitude of the leaks/holes discovered:

1. Sealing tiny holes, which are usually caused by rust, is faster and easier. Simply wrap some tape around the hole to plug it.

2. Bigger holes in your exhausts might be the source of the unpleasant sounds emanating from your bike.

To effectively seal them, you'll require an epoxy, patch and the following instructions:

● Begin by calculating the hole size to determine the patch size you'll have to make out for the task. To provide greater coverage, increase a few cm to the dimensions you acquire.

● If you can't find a patch, aluminium can work well as a substitute.

● Clean it, and the leaky exhaust pipe region, to start preparing them for sealing.

● To patch the gap, apply epoxy to the patch. Attach the patch on your bike's exhaust pipe.

● Consider using extra ways of securing the patch, like hose clamps, to confirm that it remains in place and does not come out over time.

If fixing the leaks does not seem to be an option, you might attempt the additional exhaust soundproofing procedures.

3. Exhaust Wraps

The primary goal of exhaust wraps is to minimize heat. However, because of its capacity to suppress vibrations, it may also diminish sound. They are easily accessible on the market. A few fibre-glasses added to the titanium wraps can greatly miniseries the noise.

4. Purchase a motorbike exhaust silencer.

The growing number of riders who want quieter exhaust systems has prompted manufacturers to develop exhaust silencers that accomplish exactly what their name implies—make your exhaust silent.

A standard silencer has fibre-glass wrapping that not only shrinks the opening but also soundproofs your exhaust, resulting in quieter rides. When shopping for a new motorbike exhaust silencer, keep your exhaust pipe diameter in mind to guarantee a smooth installation. The ideal quiet has an outer diameter that is less than the inner diameter of your pipe. Replacing a silencer, once again, does not need any specific abilities. All you have to do is fit it in position and tighten the bolts, and you are done!

5. Change to new pipes

If none of the aforementioned methods appears to be effective, your only remaining alternative may be to change your motorbike exhaust pipes with new pipes.

If your motorcycle features a dual exhaust structure, we recommend installing cross pipes. These seem to do an excellent job of noise suppression by simply combining the exhaust and sound. Other pipe designs, like the h-pipe and y-pipe, are available. Some specialists also advise using a cap having a smaller circle than the new pipes. This is a method of further reducing the sound of the pipes.

6. Routine Inspection and Servicing

Instead of sitting for your bicycle to make noises, it's preferable to get it checked out and serviced on a regular basis. Obtaining an online two-wheeler insurance coverage would be perfect given the different parts that may need to be replaced, or just to rest easy understanding that your motorcycle is protected against harm.

Conclusion

Try these tricks to reduce your bike's rumble and go on fun trips with your dear ones. Drive safely and responsibly. Also, please don't forget to insure your bike since, in addition to excellent care, your two-wheeler needs the shield of decent two wheeler insurance.

Disclaimer: The above information is for illustrative purpose only. For more details, please refer to policy wordings and prospectus before concluding the sales.

RELATED ARTICLES

9 Tips to Reduce Your Two Wheeler Insurance Premium

Know All About Two Wheeler Insurance Policy Coverage

Simple Steps to Get Cheap Two Wheeler Insurance in India

---

• 
• 
• 
•