1. Home
2. Blogs

Planning to Buy a New Bajaj Pulsar? Here’s Your Maintenance Guide

• 
• 
• 
• 0
• 0

Don’t we all want to keep our dream bike always healthy and new? But many times, we overlook the requirement of regular maintenance after a few months of purchase. But it needs only a few simple things to do to keep your bike in good condition and new. All you need to ensure to do on regular basis is inspect your new Pulsar before each ride, secure bike bolts, clean the key components and lubricate them. Some of the riding techniques and starting techniques can also help in keeping your new Pulsar in great condition. Secure yourself and your bike smile with periodic maintenance and Bajaj two wheeler insurance.

Let’s take a look at some of the helpful new Pulsar run-in and maintenance tips for its long and healthy life:

1. Before we list out the maintenance tips, here are some of the helpful techniques for the smooth running of your new Pulsar:

2. When you start in the morning, use kick and choke and leave the choke slowly and gradually as the engine comes to operating temperature and starts smoothly.

3. While starting your new pulsar, it is good to depress the clutch and kick five times for slight oil circulation in the sump.

4. Do not start your bike with sudden acceleration and keep the riding speed an average of 60-kilo meters to keep the bike’s condition good for long and to minimize fuel consumption.

Moving on to the periodic maintenance of the new Pulsar bike, let’s take a look at some of the simple, basic, and helpful tips:

1. Keep a check on the engine:

The engine is the heart of your bike. You need to keep a constant check on the oil in the engine. To ensure the engine is lubricated and cool, keep checking on oil levels. Impurities in the oil can make it thick. Hence, change the old oil as and when it is necessary and keep a check on oil levels. Also, ensure there are no oil leaks. It is important for keeping the engine healthy and for long life. Crucial parts like engines can be well protected by availing an additional (add-ons) protection under Bajaj two wheeler insurance.

2. Clean your bike regularly:

It is crucial to clean your bike regularly. Mud and dirt can take away the exterior look of the vehicle. Ensure to wash your new pulsar at least once a week. It is important to know that splashing water onto the bike is not advisable. Clean it using water spray or a wet cloth to wipe the bike. Do not use any regular soap which can dull the colour and ensure to clean your bike using car shampoos.

3. Clean air filters:

Specifically in India where the roads are dusty, it is important to clean the air filters to prevent them from clogging and poor combustion of fuel. The frequency of cleaning can vary depending on the dusty conditions. Get the air filters changed as and when it is advised.

4. Check bike tyres regularly:

It is important to regularly check the tyres of the bike to ensure the condition of the bike. Air pressure needs to be checked regularly. Ensure there are no scrapes and cut that would not lead to a tyre blowout. With time there will be normal wear and tear.

5. Keep a check on the battery:

You need to periodically maintain the battery of your bike to ensure the long life of the battery without any hassles. You can always top up the battery with distilled water if it is necessary. If you are not using your new pulsar regularly, ensure the battery is kept fully charged to ensure a trouble-free smooth ride. Keep a check on battery leakage regularly.

6. Cleaning and lubrication of key parts:

Many components of your new pulsar need cleaning and regular lubrication. Clean the chain of new pulsar clean, lubricated, and keep the chain slack adjusted. You can wash the chain using paraffin and remove all the accumulated dirt using a soft brush or a wet cloth. Keep in mind that chain cleaning should not be done using water as chain links can catch rust. You can lubricate the chain using engine oil for every 800 km.

7. Maintain brakes:

Depending on your style of rising new pulsar and requirement, you can adjust brakes (tight/loose). In case of lack of oil or any sounds, ensure to change the brake pads. Maintaining the brake is also important to keep the bike in a good condition for a long.

Conclusion

Your valued possession like new pulsar needs to be always well maintained and well protected. Following the basic and simple tips mentioned above can help you keep your new pulsar brand new even with regular use. Do not forget to get your vehicle serviced by the experts as and when it is necessary. Maintaining the bike well is important for the long life of the vehicle. Along with that, you can always secure it financially by availing of Bajaj two wheeler insurance.

Disclaimer: The above information is for illustrative purpose only. For more details, please refer to policy wordings and prospectus before concluding the sales.

RELATED ARTICLES

5 Reasons to Choose a 3 Year Comprehensive Bike Insurance Policy

FACTORS TO CONSIDER FOR BIKE INSURANCE RENEWAL

What to do if your bike insurance policy expires?

---

• 
• 
• 
•