The Ultimate Guide to Maintain Your Bajaj Pulsar 125 Tyres
The Ultimate Guide to Maintain Your Bajaj Pulsar 125 Tyres
Bajaj Pulsar 125 has a combi brake system, digital speedometer, air-cooled engine and many efficient features, but the tyres are the one element in constant contact with the road. People often don’t take the maintenance of tyres seriously. Poor quality of tyres can make you a victim of severe accidents. This is the reason people opt for comprehensive life insurance. Insurance will compensate for your injuries, but to protect the vehicle, you must maintain the tyres and get bike insurance. Focusing on tyre maintenance increases the overall durability of the bike and enhances the riding experience. Service the tyres is not too hard; you must know the right way.
Essential Tips for Tyre Maintenance
Although comprehensive bike insurance covers repairs, raising frequent claims can increase your premium. By following the tips mentioned below, you can enhance the performance of the bike’s tyres and eliminate frequent claims.
1. Optimal tyre pressure
Tyre pressure determines the bike’s longevity on the road. The air pressure in the tyre should be at an optimum level so that it rides through the small potholes smoothly. Tyre pressure is not the same for all the bikes. Bajaj Pulsar 125 tyres have an air pressure of around 25 to 32 psi. It would help to refer to the user guide to gain complete information.
The pressure in the tyre should neither be more nor less. It should match the mentioned range of pressure. Inaccurate air within the tyres can wear them out and cause the bike to skid, causing accidents.
2. Timely repairs
The tube within the tyre of the bike is sensitive. While riding, a small nail can get inserted in the tyre and destroy the tube. You must immediately get it repaired by a mechanic. A delay in repair can worsen the condition of the bike. So, it is necessary to dedicate frequent repair sessions to prevent leakage and puncture. People often ignore a nail in the tyre and find themselves stuck in the middle of their journey. Well-maintained Bajaj Pulsar 125 tyres eliminate frequent tyre replacement, promoting a hassle-free trip.
3. Washing the tyres
The tyres of the bike have a pattern engraved on them, which helps it to make a grip on the road. Riding on muddy terrain invites the mud to stick to the tyres and weaken the grip. Muddy tyres increase the chances of skidding on the road. You must focus on washing the tyres regularly to avoid skidding when you apply breaks. If you are a person who likes to ride on rainy days or adventurous roads, then cleaning the bike’s tyres should be your priority. So, do not delay the task of washing tyres from now on.
4. Tyre replacements
A bike is a mobile machine that needs new replacements. Tyres wear out and lose grip with time and can no longer serve their purpose, no matter how much you wash them. Replacing the tyres with a new pair is necessary at a certain point. If you observe that the bike is skidding after applying brakes, it is a sign for a replacement. Replacing the tyres might seem like a big task, but it is not. Contact a professional mechanic; they will guide you regarding the replacement procedure.
5. Appropriate replacements
While getting new replacements, do not use fancy tyres to enhance the bike's visual appeal. The tyres should support the bike accurately to prevent any mishaps. Please do not experiment with tyres because they can cause severe damage. Every bike model has different tyre requirements. You should understand the requirements as a bike owner and choose the tyre suitable for your bike. Also, inform the insurer about the tyre change to adjust the expense in the coverage.
6. Correct alignment
There are many obstructions on the road, like potholes, bumps, debris, and tarmac. While riding through these obstructions, the wheels tend to get misaligned. This misalignment damages the suspension and affects the tyres. It is necessary to ensure that the tyres are parallel to each other and at right angles to the ground. Tyres getting misaligned is a common problem that is bound to happen. To ensure the alignment, check the tyres regularly.
7. Rotation of tyres
The bike's design causes the front tyre to experience more wear and tear than the rear one, causing irregular wear and tear. It is recommended to rotate the tyres regularly so that both have a long lifespan. Rotating the tyres means replacing the front tyre with the rear one and vice versa. This rotation lets the rubber experience equal wear and tear, preventing irregular depreciation.
Choosing the Right Bike Insurance Policy
The law has made bike insurance mandatory for all bike owners. Understanding the insurance policy is as essential as purchasing one. Getting your bike insured will compensate for the losses that the vehicle undergoes. Along with the policy, there are many add-on options also that provide extensive coverage. You can purchase an add-on according to your needs. For example, if you buy an add-on cover for Bajaj Pulsar 125 tyres, the insurance policy for your Bajaj bike will cover the expenses of replacements, repairs, and labour charges.
Whether a new or old bike owner, you should purchase a third party bike insurance plan. It is also mandatory by law. Third-party insurance covers the injuries and damages done to the third party by your vehicle. To sum it up, both third-party and bike insurance are necessary for all bike owners in India.
It is important to note that the insurance market has many insurers offering insurance policies at different rates. Compare the exclusions, inclusions, premiums, claim-settlement ratio, etc, and only then make a decision.
Conclusion
As beautiful as our country is, it also has a lot of obstacles on the road. These obstacles, like the tarmac, bumps, and potholes, cause constant wear and tear on the motorbike’s tyre, which degrades the quality of the tyre over time. The degradation can be prevented by following the bike care tips mentioned in this article. Dedicating some weekly time and insurance is all your bike needs. Ensure the alignment, cleanliness, air pressure, and other vital components of the tyres. Just by doing a routine check-up, you can make the process of bike maintenance cost-efficient and enjoy a smooth ride.
Disclaimer: The above information is for illustrative purposes only. For more details, please refer to the policy wordings and prospectus before concluding the sales.
Related Articles
The Story behind the Indian Bike Market, led by Bajaj Pulsar
Planning to Buy a New Bajaj Pulsar? Here’s Your Maintenance Guide
Bajaj Pulsar P150 vs Pulsar 150 – Know the Differences
The Story behind the Indian Bike Market, led by Bajaj Pulsar
Bajaj Motors Launch the All-New Pulsar 250 Models